[TRNSYS-users] Replacing .idf file

[David BRADLEY]

Mattias,
  The "export" feature is where you need to start. Essentially the 
export feature saves any changes you have made in TRNBuild. You then 
open the exported idf file in SketchUp and make your geometry change, 
then bring the idf file back into TRNBuild. If everything worked then 
you'll have your new geometry and all the changes that you previously 
made in TRNBuild preserved. There is a tutorial on the use of Trnsys3D 
located in the ..\Trnsys17\Documentation directory. It includes some 
hints on the export/import process.
best,
  David


On 3/19/2015 04:56, Mattias Ericsson wrote:
>
> Dear TRNSYS users!
>
> I need to update my geometry created in sketchup and TRNSYS3d plug in. 
> Is it possible to import a new .idf to TRNBuild?
>
> I have looked in the archives and I find several other topics about 
> the same issue but no answer that solves my problem. The “Update 
> TRNSYS3d” command is greyed out in TRNBuild. There is an export 
> command but I don’t want to export an .idf from TRNBuild, I want to 
> change my model in TRNSYS3d and then import the generated .idf to 
> TRNBuild. Can someone explain to me what I’m missing? J
>
> Best regards
>
> Mattias Ericsson
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150319/ca16b484/attachment.htm>