[TRNSYS-users] Various configuration in Type-997

[David BRADLEY]

Sanjeev,
   The parameters of the Type describe the pipe layout so yes, you would 
have to change various parameter values in order to go from modeling a 
single straight pipe to modelign a single or a double serpentine pipe. I 
would recommend that you refer to the Type997 documentation, which can 
be found in ..\Trnsys17\Tess 
Models\Documentation\04-GHPLibraryMathematicalReference.pdf
regards,
  David


On 5/6/2015 10:39 AM, SANJEEV JAKHAR wrote:
> Dear sir,
> In Type 997 it is mention that it can be used for various 
> configuration like serpentine double serpentine etc.
> I have simulated the model for single pipe. I would like to know how 
> to proceed for serpentine and double serpentine cases. Do I have to 
> change in any parameter to make serpentine case.
> Thanks & Regards,
> Thanks & Regards,
>
> **
> ***Sanjeev Jakhar*
> Research Scholar
> *Center for Renewable Energy and Environment Development (CREED)
> Mechanical Engineering Department
> *
> *Birla Institute of Technology & Science, Pilani**
> Rajasthan - 333031*
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150506/a5f2c40b/attachment.htm>