[TRNSYS-users] Inversion Mixing Flowrate - Type 534 [Tank]

Jeff Thornton thornton at tess-inc.com
Wed May 20 11:12:07 PDT 2015


 

Without detailed measured data, or a CFD study of the tank in question,
I would set the inversion flow rate input to -100, signifying that the
inversions should be eliminated thoroughly at the end of each timestep. 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 05/20/2015 11:25 am, Anas Majdouli wrote: 

> Hi TRNsys community,
> 
> I am working on a DHW simulation using Type 534. The file is attached to this email.
> I would like to know how to choose a value for "Inversion Mixing Flowrate", which is an input for Type 534. 
> I randomly chose 100 kg/hr, but I would like to know how to calculate this flowrate or how to choose it.
> 
> Thanks in advance.
> 
> Yours Sincerely,
> Anas MAJDOULI 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150520/082694c8/attachment.htm>


More information about the TRNSYS-users mailing list