[TRNSYS-users] Error 409

David BRADLEY d.bradley at tess-inc.com
Fri Sep 4 07:10:49 PDT 2015


Marcus,
   That message is a warning and it may be that the actual error occurs 
before the warning is written. You can probably test whether Type340 is 
the problem by running a simulation that has only a Type340 in it, then 
adding a second and trying to rerun the simulation. If the problem is 
indeed in Type340 then the simplest (but somewhat dirty) fix is to open 
the Type340 code, make a copy of it and give the "new" type a new 
number, then compile the copy into a new DLL. You'll have to make a copy 
of the Type340 proforma as well. The preferred fix is to contact the 
Type's author and see if they are aware of the problem.
kind regards,
  David


On 08/26/2015 08:57, Marcus Gustafsson wrote:
>
> Hi,
>
> I’m working with a project that I got from a colleague at another 
> institution. I have modified the file to work with a larger multi-zone 
> building (6 zones compared to the original 2). The simulations worked 
> just fine when I got the file, but now, after making these changes, 
> the simulation stops at the first time step and I get the following 
> message:
>
> *** Warning at time       : 0.000000
>
>     Generated by Unit     :   247
>
>     Generated by Type     :   340
>
>     TRNSYS Message    409 : The setStorageVars subroutine was called 
> with an array size greater than that requested from the call by 
> setStorageSize routine. Only the variables located at and below the 
> limit requested by setStorageSize will be stored for this simulation. 
> Please check the formulation of the specified TYPE, rebuild the 
> dynamic link library and re-run the simulation
>
>     Reported information  : Not available
>
> Now, there are two units of this type in this file, none of which I 
> have touched. Does anyone know what this error means and how to get 
> around it?
>
> Best regards,
>
> *Marcus Gustafsson*
>
> PhD student
>
> Solar Energy Research Center (SERC)      Dalarna University
>
> Fluid and Climate Technology                  KTH Royal Institute of 
> Technology
>
> +46 (0)23-778563
>
> mgu at du.se <mailto:mgu at du.se>
>
> marcug at kth.se <mailto:marcug at kth.se>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150904/26c2e6cd/attachment-0001.htm>


More information about the TRNSYS-users mailing list
"author.html#27567">[ author ]
More information about the TRNSYS-users mailing list