[Bldg-sim] bad building component message
Christopher Sturdivant
csturdiv at rmf.com
Wed Mar 5 11:43:05 PST 2008
Hello All,
I have finally figured out how to make a one-sided sloped roof by making
polygons. Now that I am finished with that part I am trying to simulate
the building's design performance but a "bad building component message"
pops up on the screen. The way that I constructed the roof was I took
the dimensions of the used to be flat roof and used those to make a
rectangular polygon and tilted it. After that it left openings on both
sides near the top b/c it's going from being flat to slope so I made
triangular polygons on both sides to fill in the space. Also the
building was divided up into two zones with a partition wall separating
the two and it went up to the roof/ceiling, so could that be the problem
and if that is so then how to I construct a ceiling in the detailed edit
wizard screen?
Thanks.
Christopher Sturdivant
Design Engineer-Mechanical
RMF Engineering, Inc.
Ph: 843-971-9639 ext. 110
Fax: 843-971-9641
csturdiv at rmf.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080305/fc8f42d0/attachment.htm>
More information about the Bldg-sim
mailing list