[EnergyPlus_Support] Temperature setpoints

["carlosochoam" <carlosochoam@xxxxxxxxx>]

Dear all,

I'm running a simulation of an insulated single space building with 
a double pane window using the Purchased Air option. The orientation 
of the building will change in order to show the effect of daylight 
in reducing or increasing the heating and cooling loads throughout 
the year.

I would like to run it so that the Purchased Air is turned on 
according to certain temperature (temp. setpoints). 

Do the setpoints in EnergyPLus reflect the temperature of the 
specified space node or from the outdoor environment? Is there any 
way to specify them that way?


Many thanks,

Carlos





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/