Re: [EnergyPlus_Support] Re: About SVG file

["Michael J. Witte" <mjwitte@xxxxxxxx>]

The file runs here and produces a complete svg output file using version 
1.2.1.022  I have uploaded the resulting svg file to the yahoo files area.  
Does the svg file exist?  Use the file explorer to look for 
UWAAYAutosizetoentireyear2.svg in the same folder as the idf file.

If the svg file exists, do you have an svg viewer installed?  Two common 
viewers are available at

www.adobe.com/svg 

www.w3.org/Amaya/ 

If you have an svg viewer installed, perhaps EP-Launch has not been set up to 
find the viewer.  In EP-Launch, under the File menu, select "Autofind 
Programs".  Note this may reset some of the other file viewers assigned in EP-
Launch.

Mike




On 3 Apr 2005, at 22:55, energypluser wrote:

> 
> 
> Dear Linda
>       Yes, I run the file with the EP-Launch.There is a .bnd file saved 
> after the simulation. But I don't know how to run the HVACDiagram 
> program on the .bnd file. What should I do to make sure the program is 
> running £¿And I will upload the file to the Problem_Submittals area, 
> please figure it out for me
>       Thank you very much
> 
> 
>                                         charlie
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/