Re: [EnergyPlus_Support] Air cooled codenser

["Michael J. Witte" <mjwitte@xxxxxxxx>]

Air-cooled condensers are modeled within the component and do not require a 
condenser loop.

Mike


On 21 May 2005, at 13:27, Maria Eugênia de Almeida Freitas wrote:

> Dear all,
> I am simulating a kasset split system with outlet air. The codenser is 
> air-cooled. In Energy Plus, the Field:FluidType (Group: Plant Condenser 
> Loop - Plant Loop) is only for water. Where is the field for air?
> Thank you foor your help
> Maria Eugênia
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/