[EnergyPlus_Support] Re: Zone Infiltration: no heat gain; only loss

["JV Dirkes II" <jvd2pe@xxxxxxx>]

Thanks, Linda.  I had previously studied the infiltration calculation
to determine which coefficients suited my model, but I failed to
notice that the delta T calculation was (Tzone-Todb).  It all makes
sense now!

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "linda@..." <linda@...> wrote:
>
> You can double check the documentation but I believe it is the Zone 
> Temperature and not the setpoint that determines whether Infiltration 
> loss or gain.
> 
> Linda
>




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/