[Equest-users] error message: "ShellWiz has no validZnGrpWizchildren." --- too many shells?

[John Aulbach]

Let's try this..as I don't have much time today..

Never try to name your files in the Wizard, as they will all be erased and substitued with the THX1138 version of language (famous SF movie). And if you try to change the .INP file while still in Wizard mode, they will also be erased.

When you get into the Detailed Edit mode, THEN you can make a space "OFFICE-1" or CLASS-2, versus EL1 Ground Floor Core, as Gary intimated.

Gary, I would need an example of what space you could not rename and reassign. I have always been able to name and reassign spaces, zones, and HVAC systems once in the Detailed Edit mode.

I BELIEVE this naming nomenclature difficulty may be eliminated in the near future...



John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 



________________________________
From: "Gary.Schrader at buildings.schneider-electric.com" <Gary.Schrader at buildings.schneider-electric.com>
Cc: equest-users at lists.onebuilding.org
Sent: Tue, April 13, 2010 1:14:10 PM
Subject: Re: [Equest-users] error message: "ShellWiz has no validZnGrpWizchildren." --- too many shells?


I have received this error on several occasions by screwing up the Zone Group Definitions Screen in the DD Wizard. (Screen 14)
 
I have never liked eQuest's naming nomenclature, so I have always renamed zone groups myself so that I can better keep track of what is what. (e.g.. "Gym" as opposed to "EL1 Ground Floor Core")
 
If you delete all of the zone groups and then recreate them with your own name, sometimes I experience being unable to assign the new groups to spaces. When I click the mouse on a space, a context menu does NOT appear as it normally does. In this case, I am "stuck" and cannot assign a zone group to a space.
 
My experience has been that this error occurs much more commonly if you have only one or two zone groups to assign to spaces.
 
Previous uses have already chimed in as to the solution... a manual edit of the .pd2 file. Just thought I would give some background as to what I have done in the past to cause the error.
 
Thanks,
Gary
_______________________________________________________________________________________________________________________


Gary Schrader | Schneider Electric | Buildings Business | Energy Solutions | Engineer I
Phone: +1 | Mobile: +1 913 217 8068 | Fax: +1 913 469 0206
Email: gary.schrader at buildings.schneider-electric.com | Site: www.schneider-electric.com/buildings | Address: 16011 College Boulevard, Suite 212, Lenexa, KS 66219, USA

*** Please consider the environment before printing this email.



________________________________
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of James Hansen
Sent: Tuesday, April 13, 2010 2:44 PM
To: Carol Gardner; Richard Williams
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] error message: "ShellWiz has no validZnGrpWizchildren." --- too many shells?


Open up your PD2 file and take a look around – the ZnGrpWiz command usually follows the Dayshapes/Shapewiz commands for each shell, and directly precedes definition of the custom zones for the shell.
 
Look thru each shell, and see if some have them and some don’t…I don’t know why eQuest wouldn’t automatically define this, but I’ve successfully messed around with the PD2 file before without damaging anything.  Make you can copy one of the ZnGrpWiz commands from one shell to another and make sure to rename accordingly.
 
Shellwiz is a lot more important:  that’s the “beginning” of the definition for each shell.  Open up the PD2 file and see if there are ANY shellwiz definitions, and report back…
 
GHT Limited
James Hansen, PE, LEED AP
Senior Associate
1010 N. Glebe Rd, Suite 200
Arlington, VA  22201-4749
703-338-5754 (Cell)
703-243-1200 (Office)
703-276-1376 (Fax)
www.ghtltd.com
 
 
From:equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Carol Gardner
Sent: Tuesday, April 13, 2010 3:29 PM
To: Richard Williams
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] error message: "ShellWiz has no valid ZnGrpWizchildren." --- too many shells?
 
This sounds like an eQUEST developer question. Hopefully one of them will be willing/able to take the time to answer it.

Carol
On Tue, Apr 13, 2010 at 12:09 PM, Richard Williams <Richard.Williams at arup.com> wrote:
 
Dear all
 
I have been building a model with a large number of shells. I understand that this is not ideal but I have many overhangs and setbacks.
 
Once I reach about 60-70 shells a get the following error messages:
 
“ShellWiz has no valid ZnGrpWiz children.”
 
“Error: No ShellWiz components exist.”
 
“Error creating BDL input file from wizard inputs!”
 
 
After these messages the model becomes unusable. Is this likely to be a shell problem or perhaps something to do with the limitations of running in wizard mode?
 
Any suggestions much appreciated.
 
Regards
 
Richard
____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
 
The information contained in this communication is confidential, may be privileged, and is intended only for the use of the addressee.  It is the property of GHT Limited.  Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify me immediately by return e-mail or by e-mail to ght at ghtltd.com, and destroy this communication and all copies thereof, including all attachments.  Thank you. 
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

________________________________



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100413/529d12aa/attachment-0001.htm>