[Equest-users] Value not between 0.0000 and 100000.0000

[Kelsey VanTassel]

Do you have daylighting turned on? I have gotten this error when I have daylighting turned on in wizard mode and then I make changes to the shells. I leave the daylighting off until I am done with the geometry.

Kelsey Van Tassel
Project Engineer | kvantassel at sustaineng.com<mailto:kvantassel at sustaineng.com>
608.836.4488 ext. 20 | Fax: 608.836.4477
[cid:image001.jpg at 01CC8CAD.394D7470]
Sustainable Engineering Group
901 Deming Way, Suite 201
Madison, WI 53717
www.sustaineng.com<http://www.sustaineng.com/>


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Danny Xu
Sent: Monday, October 17, 2011 8:48 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Value not between 0.0000 and 100000.0000

Hello,

Could anyone explain what is "value not between 0.0000 and 100000.0000" and how to correct it?  My project is a stadium and I used CAD drawing to input the building shell.  Thanks.

Regards,
Danny
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111017/94720c7b/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 4308 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111017/94720c7b/attachment-0002.jpg>