[Equest-users] DX Cooling Option

[Eric Hethcoat]

I've got a baseline and proposed model for a project set up.  I've been
thru every wizard mode input, then changed several items in the detailed
input mode.  Successful runs for both.  
 
The one thing that is not showing up on only a single zone for one
system between both models is cooling.  In the wizard mode - it is
entered as "no cooling".  I understand this limits what systems can be
chosen - in wizard mode.
 
In the detailed mode I've been thru every cooling tab to ensure all
cooling properties are correctly indicated as if we had DX - however
under the air-side system tab, the selection of chilled water or DX is
not available - and is greyed out to N/A.  I've played with zone temps,
schedules, etc. and none have any change in the result for cooling in
this area.
 
How can I ensure that I have the proper cooling?  I only have standard
gas fired heating/DX cooling PSZ equipment.  No heat pump.  
 
Eric Hethcoat, P.E.
Partner
Latimer, Sommers & Associates, P.A.
3639 SW Summerfield Dr., Suite A
Topeka, KS  66614
c.  913.481.3256
w.  785.233.3232
f.  785.233.0647
ehethcoat at lsapa.com
 
This message and any attachments included here-in, are solely for the
intended recipient and may contain confidential or privileged
information.  If you are not the intended recipient, any review,
disclosure, copying, use, forwarding, or distribution of the information
included in this message and any attachments is prohibited.  If you have
received this communication in error, please notify the sender by reply
e-mail and immediately and permanently delete this message and any
attachments.  Thank you.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120614/59f6973f/attachment.htm>