[Equest-users] Design Supply Air CFM/OSA CFM

[GK Pandian]

This is an issue of altitude factor. eQuest considers default altitude
factor according to the location. Please adjust your supply cfm accordingly.

Gopi


On Wed, Jan 29, 2014 at 6:34 PM, Tom Mickley <tmickley at thekcompany.com>wrote:

> eQuesters,
>
>
>
> Why does the design flow supply cfm and design ventilation OSA cfm in the
> summary tab of the system & zone air-side summary report differ from the
> user defined inputs I use in detailed data edit mode?  Is there a way to
> make it exact without having to lower the inputs for every system to get
> desired flow rates in the summary report?  Changing each system's flow and
> making several simulations until I find the right cfm is too time
> consuming.  Does eQuest automatically account for duct leakage that would
> skew the numbers?  If so, how do I change it?  Thanks in advance!
>
>
>
> Thanks,
>
>
>
> Tom Mickley
>
> Mechanical Engineer CEM
>
> The K Company
>
> Cell 330-760-3994
>
> Office 330-773-5125
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140129/2271a24e/attachment-0002.htm>