[Equest-users] ERV questions

[Michael Campbell]

A couple questions regarding an energy recovery system that I am trying to
model.  The sequence of operations is attached.  Basically it is a glycol
loop energy recovery system.  Heat is transferred from exhaust to the
glycol loop, then the glycol loop is routed to the AHUs.  The glycol pumps
turn off at outside air temperatures between 46F – 82F.



What is the best way to model this type of energy recovery system?

What is the best way to model the operating schedule?



Any help is greatly appreciated.



Thanks,



*Mike Campbell, E.I.T., LEED AP O+M*
*Sustainability Specialist*
*Sustainable Solutions Corporation*
Office: 610-569-1047

Mobile: 609-923-1743 <http://610-569-1047/>
www.SustainableSolutionsCorporation.com
<http://www.sustainablesolutionscorporation.com/>
*Sustainable Solutions Corporation is WBENC and BCorp Certified.*

*This email message and any attachments are for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure or distribution is
prohibited. If you are not the intended recipient, please contact the
sender by reply email and destroy all copies of the original message and
any attachments.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140707/b1ef2a83/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: B14 Energy Recovery System Sequence.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 26441 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140707/b1ef2a83/attachment.bin>