[Equest-users] Wizard Data Edit Mode to Detail Data Edit Mode, Hourly Report

[Singhal, Harshul]

Yes, it will be transferred successfully. But it's a one way process. The minute you move to detailed mode and make changes there, you can't come back to wizard mode and expect those changes reflected in there. I would say, if you have limited experience & your project can be taken care of by wizard mode (atleast most of items), try accomplishing it there and then move to DD mode for necessary changes.

Harshul Singhal
Project Consultant
Thornton Tomasetti
386 Fore Street, Suite 401
Portland, ME  04101
T 207.245.6060  F 207.245.6061
D 207.245.6074
HSinghal at ThorntonTomasetti.com
www.ThorntonTomasetti.com
From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Tina Yao
Sent: Friday, June 20, 2014 2:44 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Wizard Data Edit Mode to Detail Data Edit Mode, Hourly Report

Hello,

I am an engineering student working on an energy simulation project using eQUEST. I am wondering when switching from wizard data edit mode to detailed data edit mode, will all information entered be successfully transferred.

I am switching modes for the purpose of producing hourly reports.


Thank You

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

The information in this email and any attachments may contain

confidential information that is intended solely for the

attention and use of the named addressee(s). This message or

any part thereof must not be disclosed, copied, distributed

or retained by any person without authorization from the

addressee. If you are not the intended addressee, please

notify the sender immediately, and delete this message.

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140620/c6775af4/attachment.htm>