[BLDG-SIM] storage effect

[Per Sahlin]

Dear Farraj,

If you need to monitor the heat flux, temperatures etc. of individual walls
you may want to take a look at IDA Indoor Climate and Energy (ICE) at
www.equa.se/ice . ICE allows you to interact closely with the models and
monitor each variable. Three alternative wall models are offered: (1) a full
finite difference model where all internal temperatures are available, (2) a
corresponding model with a separate BDF integration algorithm (default), and
(3) a  two or three node RC network model, where parameters are
automatically optimized at relevant frequences.

Best regards,

Per Sahlin

----------------------------------------------------------------------------
--------------
Per Sahlin,
EQUA Simulation AB
(formerly Bris Data AB)			phone: 	+46-8-27 27 67   (work)
                        	    				+46 70 422 03 02 (mobile)
P.O. Box 1376		            	     		+46 8   83 95 82   (home)
172 27 Sundbyberg, Sweden		fax:	+46-8-27 40 32
http://www.equa.se      			email: 	per.sahlin at equa.se
----------------------------------------------------------------------------
--------------



   > -----Original Message-----
   > From: postman at gard.com [mailto:postman at gard.com]On Behalf Of F.ajmi
   > Sent: Thursday, March 07, 2002 3:35 PM
   > To: BLDG-SIM at gard.com
   > Subject: [BLDG-SIM] storage effect
   >
   >
   > Hi, everybody
   >   Does any one know if TRNSYS-PREBID (Multi-zone building simulation)
   > includes  the rate of heat flow into or out of the mass of building
   > materials in it when simulating  the energy consumption of a
   > building

   > heavy weight structure).
   > if the answer is no any other packages recommended,
   > Thanks in advance,
   >
   >
   >
   > Farraj Alajmi
   > Department of Civil & Building Engineering
   > Loughborough University
   > Loughborough Leics  LE11 3TU  UK
   > Tel(01509)263171 ext.4140
   >
   >
   >
   > ======================================================
   > You received this e-mail because you are subscribed
   > to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe
   > from this mailing list send a blank message to
   > BLDG-SIM-UNSUBSCRIBE at GARD.COM
   >
   >


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM