[Bldg-sim] doe output reports

[Alec Stevens]

Hi,
I'm trying to debug the operation of a fluid cooler in PowerDoe by creating an hourly report.
So I create a report block for "Heat Rejection" and select my fluid cooler.
I'm looking for the actual capacity of the fluid cooler at the prevailing hourly conditions.
So my first guess was "Maximim thermal load on tower given current conditions"
But when I plotted the results vs. OA wetbulb temperature, the graph doesn't make sense.
Any suggestions as to what the correct hourly result series is?

Thanks

Sincerely,

Alec Stevens
DMI
450 Lexington St.
Newton, MA 02466
p: 617-527-1525x105      f: 617-527-6606
e: astevens at dmiinc.com


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20020516/4b7fff85/attachment.htm>