[BLDG-SIM] Thermal mass walls
Brian Thornton
bthornton at glumac.com
Wed Jun 25 08:39:58 PDT 2003
On a related note: I have run a number of simulations in DOE-2 and talked
with others about using mass in a structure, with and without the night
flush algorithms capability. With custom weighting factors or not, it seems
very difficult to show any net benefit from mass in the structure.
Have others found that they can show significant energy benefit in DOE-2
from the use of mass i.e. from delay of cooling loads into unoccupied hours?
Any success with the night flush routines?
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20030625/7d54f843/attachment-0002.htm>
More information about the Bldg-sim
mailing list