[BLDG-SIM] Clarification: Hourly electrical utility report

[Patrick Dolan]

I have a number of questions regarding what I was looking for in my earlier email.  I thought I should clarify why I am asking for advice:  I actually need hourly reports to verify the metered building electrical energy versus the amount of electrical energy generated by building mounted photovoltaics.  I need to determine what percentage of the yield from the PV system is in excess of the total building load at any point during the year.  In my building, if the yield is greater than the load, then corresponding amount of electricity in kWh will be "net-metered" or reverse metered to the grid.  Since we will be developing an hour-by -hour model of the PV yield, I need a whole building energy end use-report to match.  The ultimate goal will be to predict the amount of energy sold back to the utility.  I know that I have total operating hours and demand kW in other reports.  In summary, that's why I need an hour-by-hour report.

Thanks again,

Patrick J Dolan
Prisco Serena Sturm Architects
3351 Commercial Ave.
Northbrook, IL  60062
847-564-0370, Ext 24
847-205-5089, Fax
pdolan at pssarchitects.com


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20030502/c1cf59c7/attachment.htm>