[BLDG-SIM] Heating and Cooling ventilation system

[Jeff Haberl]

Hello:

ASHRAE RP-865 has a four-pipe, fan coil simulation on a spreadsheet that you
can easily add an economizer to. Copies of the final report can be obtained
from  ASHRAE.

Jeff

8=!   8=)  :=)   8=)   ;=)   8=)   8=(   8=)   8=()   8=)   8=|   8=)   :=')
8=)   8=)   8=?

Jeff S. Haberl, Ph.D., P.E.............................jhaberl at esl.tamu.edu
Professor...............................................Office Ph:
979-845-6507
Department of Architecture...........................Lab Ph: 979-845-6065
Energy Systems Laboratory...........................FAX: 979-862-2457
Texas A&M University..................................77843-3581
College Station, Texas, USA...........................URL: www-esl.tamu.edu

8=/   8=)  :=)   8=)  ;=)   8=)   8=()   8=)   :=)   8=)   8=!   8=)   8=?
8=)   8=)   8=0   



-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com]On Behalf Of Chris Jones
Sent: Sunday, November 30, 2003 7:42 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Heating and Cooling ventilation system


I am looking to simulate a four-pipe fan coil with economiser 
control.  This is not possible with DOE2.1E and when I scan the DOE2.2 
documentation it looks like it also lacks the capability to simulate a fan 
coil system with economiser control.  The system I want to simulate is a 
unit-ventilator with heating and cooling coils, an outdoor air damper with 
economiser control.  This type of system is being used in schools - new and 
retrofit.  An example of a configuration is discussed in "TPFC for Schools 
(Esource).pdf" an Esource article.  My client is interested in converting 
from hot water convectors to a two or four pipe unit ventilator.

Thanks for any insight into simulating this configuration.





Chris Jones, P. Eng.
14 Oneida Avenue
Toronto, ON M5J 2E3
Tel. 416 203-7465
Fax. 416 203-8249

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM