[BLDG-SIM] Looking for central plant energy trade-off tool fo r conceptual de sign
Jeff Haberl
jhaberl at esl.tamu.edu
Tue Oct 14 06:29:32 PDT 2003
The following paper may be of some assistance.
Jeff
Beasley, R., Haberl, J., Turner, D. and Claridge, D. 2002. "Development of a
Methodology for Baselining The Energy Use of Large Multi-building Central
Plants", ASHRAE Transactions-Research, Volume 108, Part 1, pp. 251 - 259,
(January).
8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) 8=() 8=) 8=| 8=) :=')
8=) 8=) 8=?
Jeff S. Haberl, Ph.D., P.E.............................jhaberl at esl.tamu.edu
Professor...............................................Office Ph:
979-845-6507
Department of Architecture...........................Lab Ph: 979-845-6065
Energy Systems Laboratory...........................FAX: 979-862-2457
Texas A&M University..................................77843-3581
College Station, Texas, USA...........................URL: www-esl.tamu.edu
8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) :=) 8=) 8=! 8=) 8=?
8=) 8=) 8=0
-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com]On Behalf Of Mike Roberts
Sent: Monday, October 13, 2003 10:23 AM
To: bldg-sim at gard.com
Subject: [bldg-sim] Looking for central plant energy trade-off tool for
conceptual de sign
eQUEST would allow you to quickly build buildings using the Schematic Design
Wizard. The Schematic Design Wizard has good defaults for many building
types. Depending on the accuracy you want initially, you could build one
large building very quickly or you could build several models of future
buildings and import them all into a single model for the central plant
analysis. This second option would also allow you to update the model as
further information became available.
If you have the first phase ready to model, you could do that with a
multiplier, or add Schematic Design models of future buildings.
Mike
-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com]On Behalf Of Brian Thornton
Sent: Monday, October 13, 2003 9:09 AM
To: bldg-sim at gard.com
Subject: [bldg-sim] Looking for central plant energy trade-off tool for
conceptual de sign
Hello,
Can anyone recommend software that allows fairly rapid analysis of energy
trade-offs between central plant equipment and configurations, when the
buildings to be served and loads are still speculative? This is for a
campus that will be built in phases over many years, and most buildings are
only loosely defined. DOE-2 will be more difficult and detailed than
warranted.
Thank you for your input.
Brian Thornton, P.E.
Lead Engineer, Energy Services
GLUMAC
I N T E R N A T I O N A L
320 SW Washington, Suite 200
Portland, Oregon 97204
503.227.5280 Phone
503.274.7674 Fax
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20031014/bd61a61a/attachment-0002.htm>
More information about the Bldg-sim
mailing list