[bldg-sim] Slab on grade f-factor

[Jeff Haberl]

What are you planning on using these numbers for?

Jeff


8=!   8=)  :=)   8=)   ;=)   8=)   8=(   8=)   8=()   8=)   8=|   8=)   :=')
8=)   8=)   8=?

Jeff S. Haberl, Ph.D., P.E.............................jhaberl at esl.tamu.edu
Professor...............................................Office Ph:
979-845-6507
Department of Architecture...........................Lab Ph: 979-845-6065
Energy Systems Laboratory...........................FAX: 979-862-2457
Texas A&M University..................................77843-3581
College Station, Texas, USA...........................URL: www-esl.tamu.edu

8=/   8=)  :=)   8=)  ;=)   8=)   8=()   8=)   :=)   8=)   8=!   8=)   8=?
8=)   8=)   8=0   



-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com]On Behalf Of L. Calvin
van Belle
Sent: Friday, September 12, 2003 3:58 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] Slab on grade f-factor


Thank you everyone for your quick response.  I have found the ASHRAE tables
and none of them apply to my situation.  I have an uninsulated slab that is
8" thick.  All the ASHRAE tables deal with insulated slabs or 6" slabs.

Do the numbers for a 6" slab change significantly when going to an 8" slab?

Calvin

___________________________________________
L. Calvin van Belle     Phone: 206-241-2012
Mechanical Engineer     Fax:   206-241-3101
       lvanbelle at tei-engineering.com
                  T. E. I.


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM