[BLDG-SIM] TMY2 Data Conversion to Bin Data
Mark Case
mcase at etcgrp.com
Fri Jun 18 12:44:05 PDT 2004
A quick and dirty way is to define an hourly report with the weather
data (global variables) you seek.
-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com] On Behalf Of
Aulbach, John
Sent: Monday, June 14, 2004 4:40 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] TMY2 Data Conversion to Bin Data
There HAS to be a way to get a text file of the 8,760 hours of
data from a TMY2.bin file used in eQuest and DOE-2.1E. I know there is a
weather utility in both programs, but I am not sure of how to set up the
command line or how to execute it.
Someone smart out there KNOWS how to do it.
John R. Aulbach, PE, CEM
Project Engineer
Sempra Energy Solutions
555 West Fifth Street
Mail Location 27F3
Los Angeles, CA 90013
Tel: (213) 244-8551 Cell (213) 219-4875
"Sempra Energy Solutions is not the same company as SDG&E/
SoCalGas, the Utilities. Sempra Energy Solutions is not regulated by
the California Public Utilities Commission, and you do not have to buy
Sempra Energy Solutions products or services to continue to receive
quality regulated service from the Utilities."
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20040618/4202147f/attachment-0002.htm>
More information about the Bldg-sim
mailing list