[BLDG-SIM]

[Jason Glazer]

Vikram,

Sounds like Georgia Power. I don't know exactly how to do 
this in DOE-2.2 but I know that it can be done in DOE-2.1e. 
If you look at Example 12 "Mixed Energy Block Types with 
Complex Demand Ratchets" on page 5.47 of the DOE-2.1e 
Supplement you will see this rate described (some of the 
numbers have changed since then).  

You will probably need to use the KWH/KW-LIMITSUM option. I 
think the only difference in DOE-2.2 is that the numbers in 
the block data are entered differently.

Jason

On 9 Mar 2004 at 13:28, Vikram Sami wrote:

>  Hi,
>  A project I'm currently workinghas a slightly complicated
>  electricity rate .  I have already tried breaking up the
>  rates into 2 blocks - the first one is an energy block, and
>  the next one is a kWh/Kw block, but it doesnt seem to go to
>  the kwh/kw rate even when the ratio is over 200kwh/kw. Is
>  there something I am missing, or is it just something that
>  cant be modelled in eQUEST?
> 
> Thanks
> 
> Vikram Sami
>   _____  
> 
> Ensar Group Inc.
> 2305 Broadway
> Boulder, CO 80304
> Tel: (303) 449-5226
> Fax: (303) 449-5276
> 
> 
> 
>   _____  
> 
> 
> Base
> Charge......................................................
> .................................................. $14.00
> All consumption (kWh) not greater than 200 hours times the
> billing demand: First 3,000 kWh
> ............................................................
> ..... at ............................. 8.757¢ per kWh Next
> 7,000 kWh
> ............................................................
> ..... at ............................. 8.026¢ per kWh Next
> 190,000 kWh
> ............................................................
> . at ............................. 6.910¢ per kWh Over 200,000
> kWh.........................................................
> .... at ............................. 5.355¢ per kWh All
> consumption (kWh) in excess of 200 hours and not greater
> than 400 hours times the billing demand
> ...................................................... at .....
> ........................ 0.892¢ per kWh All consumption
> (kWh) in excess of 400 hours and not greater than 600 hours
> times the billing demand
> ...................................................... at .....
> ........................ 0.672¢ per kWh All consumption
> (kWh) in excess of 600 hours times the billing demand
> ........................................... at ................
> ............. 0.586¢ per kWh Minimum Monthly Bill: A. $14.00
> Base Charge plus $6.42 per kW of billing demand in excess of
> 30 kW plus excess kVAR charges and Fuel Cost Recovery as
> applied to the current month kWh.
> 
> 
> 
> 
>   _____  
> 
> 
> 
> 
> 
> 
> 
> 
> You received this e-mail because you are subscribed 
> to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe from
> this mailing list send a blank message to
> BLDG-SIM-UNSUBSCRIBE at GARD.COM


=========================================================
Jason Glazer, P.E.  jglazer AT gard DOT com  847 698 5686
GARD Analytics - http://www.gard.com/
1028 Busse Highway, Park Ridge, IL 60068
Building Energy Simulation and Analysis
Admin of BLDG-SIM list for building simulation users

===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM