[BLDG-SIM] Wet Bulb Temperatures

[William Bahnfleth]

Yes.  See chapter 6 of the 2001 ASHRAE Handbook of Fundamentals for details 
(pp. 6.13-14).  An alternative is to get a program that does psychrometric 
calculations, of which there are several (e.g., EES).

Bill Bahnfleth

At 05:43 PM 9/27/2004, Gerald Pde wrote:
>Hello,
>
>Does anyone know if you could calculate  wet bulb
>temperatures from dew point temperature?
>your coperation is appreciated.
>Gerald

_________________________________________________

William P. Bahnfleth, PhD, PE, Fellow ASHRAE
Associate Professor
Director, Indoor Environment Center

Department of Architectural Engineering
The Pennsylvania State University
104 Engineering Unit A
University Park, PA 16802 USA

voice: 814.863.2076 / fax: 814.863.4789
e-mail:  wbahnfleth at psu.edu
www.arche.psu.edu/faculty/WBahnfleth/
_________________________________________________


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM