[BLDG-SIM] Make-up air systems and heat recovery Equest
Chris Jones
cj at cr-jay.ca
Wed Aug 24 07:29:46 PDT 2005
I am using DOE2.1E to model a typical four pipe fan coil system. Fresh air
is by a make-up air system ducted to near each fan coil. Relief air is
exhausted through an enthalpy reclaim system coupled with the fresh air
supply fan. DOE2.1E does not model this arrangement. Can I do it with
Equest (DOE2.2) using the OA-FROM-SYSTEM facility. Thanks for your help.
Chris Jones, P.Eng.
14 Oneida Avenue
Toronto, ON M5J2E3
Tel. 416 203-7465
Fax. 416 946-1005
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20050824/5494359f/attachment.htm>
More information about the Bldg-sim
mailing list