[bldg-sim] typical house heating and cooling loads

[Jeff Haberl]

Ian. 

We've got 24 Habitat houses analyzed n the thesis by Kootin-Sanwu in central Texas, as well as several years of meas data from one house. We are currently working on evaluating 120 houses built locally over a 10 year period to evaluate 2000 IECC code impact. Preliminary results look good at about 10% annual reduction when annalyzed with PRISM. Next step will be to use sliding PRISM since we see a curious upward trend on every new house for the first 12 months. 

We have also evaluated 100,000+/yr  new housing starts from 2001 to present, which can be found in the ESL. SB5 report to the TCEQ/EPA at "eslsb5.tamu.edu", or use the DOE-2 based calculator at "ecalc.tamu.edu". 

Jeff
BB 8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  :=')  8=)  8=)  8=? BB

Jeff S. Haberl, Ph.D., P.E.............................jhaberl at esl.tamu.edu

Professor......................................................Office Ph: 979-845-6507

Department of Architecture.......................Lab Ph: 979-845-6065 

Energy Systems Laboratory.......................FAX: 979-862-2457 

Texas A&M University..............................77843-3581

College Station, Texas, USA.......................URL: www-esl.tamu.edu

BB 8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=) 8=?  8=)  8=)  8= BB


-----Original Message-----
From: BLDG-SIM at gard.com <BLDG-SIM at gard.com>
To: BLDG-SIM at gard.com <BLDG-SIM at gard.com>
Sent: Tue Nov 29 19:19:33 2005
Subject: [BLDG-SIM] typical house heating and cooling loads

I’m interested in comparing my heating and cooling loads for a typical ~2000 ft2 home in the following cities:

Jacksonville, FL       
Charleston, SC 
Memphis, TN    
Astoria, OR    
Pittsburgh, PA 
Minneapolis, MN

I was wondering if anyone could direct me to some good published data on loads for these areas.  I have already looked at the RECS data. I was hoping to compare to something else.

Thanks in Advance

Ian Doebber

Graduate Mechanical Engineer

Arup

____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM