[BLDG-SIM] water to water heat pump recovery for DHW from condenser loop
Mike Tillou
miket at etcgrp.com
Mon May 9 13:17:59 PDT 2005
Go to Florida Heat pumps at www.fhp-mfg.com. They make a water to water
heat pump for residential hot water, the Thermal Saver 2000. I think it
is designed for ground source loops but may be adaptable for a condenser
water loop.
Good luck.
Mike
Michael Tillou, PE
etc Group, Inc.
-----Original Message-----
From: postman at gard.com [mailto:postman at gard.com] On Behalf Of Brian
Thornton
Sent: Monday, May 09, 2005 11:48 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] water to water heat pump recovery for DHW from
condenser loop
Does anyone have information on manufacturers and products designed to
heat potable water with a water to water heat pump, that uses a building
condenser water loop as the heat source?
This can be done with industrial process heat pumps, but then need
separate heat exchanger equipment to heat the potable DHW.
Brian
Thornton Energy Consulting
p. 503-231-6600 f. 503-231-3555
thorntonenergy at comcast.net
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20050509/ca1acaed/attachment-0002.htm>
More information about the Bldg-sim
mailing list