[bldg-sim] eQUEST Question
Grant Unsworth
gunsworth at mcw.com
Tue Oct 18 08:31:07 PDT 2005
Mark,
Your windows are being cut off because eQuest doesn't allow placement of
windows in a plenum. To fix your problem, go to wizard screen 3 and set
your Wall Ext Finish to "Glass, Spandrel".
- Grant
Zoeteman, Mark R. wrote:
> I am entering windows in the DD wizard through the custom input
> screen. When I view the windows in 3D Geometry, the windows get cut
> off above the ceiling elevation. Is the window really in the input or
> does eQUEST delete any window portion above ceiling plane?
>
> In my case I am modeling a spandrel section which is glass but doesn't
> allow any light through. The spandrel starts below the ceiling line of
> lower shell and goes up above the second shell floor plane. What's the
> best way to model this? Should I have two windows one in lower shell
> and one in upper shell?
>
> Mark Zoeteman
> FTC&H, Inc.
> (616) 464-3739
> mrzoeteman at ftch.com
>
>
>
>>
>>
>======================================================
>You received this e-mail because you are subscribed
>to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
>from this mailing list send a blank message to
>BLDG-SIM-UNSUBSCRIBE at GARD.COM
>
>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20051018/9f3390d0/attachment-0002.htm>
More information about the Bldg-sim
mailing list