[bldg-sim] eQUEST Question

[Zoeteman, Mark R.]

I am entering windows in the DD wizard through the custom input screen.
When I view the windows in 3D Geometry, the windows get cut off above
the ceiling elevation. Is the window really in the input or does eQUEST
delete any window portion above ceiling plane?

In my case I am modeling a spandrel section which is glass but doesn't
allow any light through. The spandrel starts below the ceiling line of
lower shell and goes up above the second shell floor plane. What's the
best way to model this? Should I have two windows one in lower shell and
one in upper shell?

Mark Zoeteman 
FTC&H, Inc. 
(616) 464-3739 
mrzoeteman at ftch.com 

 

	 



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20051018/780fff67/attachment-0002.htm>