[bldg-sim] error reports on metering

[Thomas White]

Scott,
 
You nailed the problem, and your advice was right on! So, the take home
lesson is NOT to include periods in eQUEST project names. Thanks for your
help.
 
...Tom
 
Thomas J. White, P.E.
Lead Engineer, Energy Services
503.345.6246  |  twhite at glumac.com
 
320 SW Washington, Suite 200
Portland, OR 97204-2640
T. 503.227.5280   F. 503.274.7674 
http://www.glumac.com <http://www.glumac.com/> 
 
-----Original Message-----
From: Scott Criswell [mailto:Scott.Criswell at doe2.com]
Sent: Tuesday, September 27, 2005 11:42 AM
To: twhite at glumac.com
Subject: Re: [bldg-sim] error reports on metering


Check the name of your project file.  If it contains a '.' (dot) before the
file extention, such as "Sample Project file ver1.23.pd2", then you should
find that this error goes away by removing the dot within the project
filename.  For some reason, dots within filenames confuse DOE-2 and result
in the truncation of results files, which in turn prevents the eQUEST
interface from being able to find the corresponding simulation results
files.

If this is not the case, e-mail me a zip file continaing the PD2 and INP and
I will take a look.

- Scott


Thomas White wrote:


Hello, fellow modelers:
 
I'm having a problem getting my model to run. I keep getting messages of the
following type:

Error retrieving EG_MoEU_ED CSV simulation results for table "Electric
Consumption (kWh)" (returned -3).

I get three other dimilar messages that address Gas Consumption, Electric
Demand, and Gas Demand.
 
My model had run previously, but when I went through the zones and plugged
in daylighting, these four error messages cropped up.
 
Any ideas? I'm obliged to you all for your help. Thanks.
 
..Tom
 
 
Thomas J. White, P.E.
Lead Engineer, Energy Services

 <http://www.glumac.com/>  
  _____  

320 SW Washington, Suite 200
Portland, OR 97204-2640
T.  503.227.5280  F. 503.274.7674  D. 503-345-6246

Thinking. Inside the building.
 <http://www.glumac.com/> http://www.glumac.com
 
 
 
======================================================

You received this e-mail because you are subscribed 

to the  BLDG-SIM at GARD.COM <mailto:BLDG-SIM at GARD.COM>  mailing list.  To
unsubscribe 

from this mailing list send a blank message to 

BLDG-SIM-UNSUBSCRIBE at GARD.COM <mailto:BLDG-SIM-UNSUBSCRIBE at GARD.COM> 

  



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20050927/8afefc24/attachment-0002.htm>