[BLDG-SIM] about pv simulation
Mottillo, Maria
MMottill at NRCan.gc.ca
Thu Apr 27 10:10:51 PDT 2006
Matthew,
ESP-r has three PV models - a simple efficiency based model and two
one-diode equivalent models. Of the latter, one was developed by
(Kelly,1998) and the other, implemented by Natural Resources Canada,
based on the WATSUN-PV model. You can find information on Kelly's PV
model on the ESRU web site: http://www.esru.strath.ac.uk/ (see
Publications; Kelly's PhD thesis is a good starting point). A validation
of both of ESP-r's one-diode equivalent models is currently underway and
results are to be published soon.
-Maria
Maria Mottillo
Building Energy Simulation Team
CANMET Energy Technology Centre - Ottawa
Natural Resources Canada, Government of Canada
580 Booth St., Ottawa, Ontario K1A 0E4
_____
From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM]
Sent: Wednesday, April 26, 2006 8:23 PM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] about pv simulation
dear all, i am trying to do simulation for bipv and bipv/t in
residential buildings for annual eletricity yield and energy efficiency.
what programs are available for that research purpose? is espr suitable
or should i use pv program PV sol or PvSyst?
is espr good for that simulation?
it will be highly appreciated if you can give any suggestion
best regards,
matthew
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060427/d734b25b/attachment-0002.htm>
More information about the Bldg-sim
mailing list