[bldg-sim] eQUEST-cooling coil leaving temp troubles
Scott Runyon
srunyon at rmf.com
Mon Feb 6 20:44:42 PST 2006
In EL1 Sys1 (VAVS) (B) , cooling coil leaving temperature
must
be at least 6F higher than entering water temp.
I have this exact error multiple times.
I know this is like asking for a needle in a hay stack, but can anyone
give me some areas to check.
I have a standard VAV system(with hw reheat) and chilled and hot water
coils.
Thermostat setpoints:
Occupied (Cooling/Heating):72/68
UnOccupied (Cooling/Heating):75/64
Design Temps:
Cooling (Indoor/Supply): 72/52
Heating (Indoor/Supply): 68/55
Baseboards:none
Heat/reheat: 20deg (this was untouched)
Economizer:
Dry Bulb Temp 65deg
Any help would be extremely appreciated.
Thanks in advance.
-Scott
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060206/d16eb09d/attachment.htm>
More information about the Bldg-sim
mailing list