[bldg-sim] Multi-level zoning in eQuest

[Gerald Pde]

The way I have handled multi level zoning is to build
one floor at a time in the wizard and saving it as a
different file. Then I manually go to the inp file and
change all the names of the spaces and associated
polygons and zones by doing a simple search and
replace using textpad. Finally, I import the inp file
of the second floor in the detailed interface.
Hope this helps.
Gerald

--- Jeff Haberl <jeffhaberl at tees.tamus.edu> wrote:

> I don't know if this is a useful exercise...since
> Equest's engine - DOE-2 really works best with 5
> zones per floor. Unless you're doing something
> completely different in each zone (I.e. Changing
> thermostat setpoints, or different sys types) I'm
> guessing it will have a marginal impact beyond 5
> zones per floor. In fact, 2 zone will probably give
> good results for most buildings (inside,outside).
> Several papers in the ASHRAE lit have addressed this
> issue. 
> 
> Jeff
> BB 8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  :=')  8=)
>  8=)  8=? BB
> 
> Jeff S. Haberl, Ph.D.,
> P.E.............................jhaberl at esl.tamu.edu
> 
>
Professor......................................................Office
> Ph: 979-845-6507
> 
> Department of Architecture.......................Lab
> Ph: 979-845-6065 
> 
> Energy Systems Laboratory.......................FAX:
> 979-862-2457 
> 
> Texas A&M
> University..............................77843-3581
> 
> College Station, Texas,
> USA.......................URL: www-esl.tamu.edu
> 
> BB 8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=) 8=?  8=) 
> 8=)  8= BB
> 
> 
> -----Original Message-----
> From: bldg-sim at gard.com <bldg-sim at gard.com>
> To: bldg-sim at gard.com <bldg-sim at gard.com>
> Sent: Tue Jan 17 11:12:58 2006
> Subject: [bldg-sim] Multi-level zoning in eQuest
> 
> Does anyone know if it’s possible to create
> different zoning patterns per floor in the Design
> Wizard in eQuest?  Manually, it can be done in
> Detailed Data Edit mode, but I know I did it once
> before in the wizard.
> 
> Thanks,
> 
> Kendra Tupper           
> 
>  FLACK + KURTZ  
> 
> 405 Howard Street               415.398.3833 Main
> 
> Suite 500                       415.402.5840 Direct
> 
> San Francisco, CA 94105         415.433.5311 Fax
> 
> http://www.flackandkurtz.com   
> kendra.tupper at sf.fk.com
> <mailto:kendra.tupper at sf.fk.com> 
> 
>                                                     
>                                                     
>       
> 
> This e-mail may contain confidential and/or
> privileged information. 
> 
> If you are not the intended recipient (or have
> received this e-mail in error)
> 
> please notify the sender immediately and destroy
> this e-mail. 
> 
> Any unauthorized copying, disclosure or distribution
> of the material 
> 
> in this e-mail is strictly forbidden.
> 
> 
> 
> 
> ==================
> You received this e-mail because you are subscribed 
> to the BLDG-SIM at GARD.COM mailing list.  To
> unsubscribe 
> from this mailing list send a blank message to 
> BLDG-SIM-UNSUBSCRIBE at GARD.COM
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM