[BLDG-SIM] Model suggestions
Andy Tindale
andy at designbuilder.co.uk
Tue Jul 11 18:12:44 PDT 2006
DesignBuilder provides an easy-to-use interface to the EnergyPlus Airnet
multizone airflow simulation capability. Set the Ventilation building model
option to 'Calculated' to activate Airnet simulations. This allows you to
account for the effect of window opening, cracks in the fabric, buoyancy
driven airflow, wind pressure on each surface etc in your calculations.
www.designbuildersoftware.com
Andy Tindale
DesignBuilder Software
-----Original Message-----
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com]On Behalf Of Steven J
Emmerich
Sent: 11 July 2006 21:37
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Model suggestions
A friend is trying to model natural ventilation for an apartment building
using individual stacks for each apartment. He is looking for a combined
airflow, thermal, & vapour model that includes the wind effects at the top
of the stack. I've given him a couple possibilities but he's open to hearing
of others. Suggestions?
thanks
steve
Steven J Emmerich
NIST
100 Bureau Drive - Stop 8633
Gaithersburg, MD 20899-8633
voice: 301-975-6459
fax: 301-975-4409
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060712/741cde80/attachment-0002.htm>
More information about the Bldg-sim
mailing list