[bldg-sim] modifying TMY2 weather file in BIN format
Bourgeois, Denis
Denis.Bourgeois at nrc-cnrc.gc.ca
Sat May 27 04:18:13 PDT 2006
Venkata,
(Sorry for cross-posting against the Radiance general discussion list)
As DAYSIM weather files are based on Energy Plus weather files, you could just convert Energy Plus files directly into DOE-2/eQuest bin files using the eQ_WthProc executable from the DOE-2 web site:
http://doe2.com/index_Wth.html
Hope this helps,
Denis Bourgeois, Ph.D.
Boursier post-doctoral CRSNG / NSERC Visiting Fellow
Institut de recherche en construction / Institute for Research in Construction
Conseil national de recherches Canada / National Research Council Canada
denis.bourgeois at nrc-cnrc.gc.ca
-----Original Message-----
From: bldg-sim at gard.com on behalf of Ramana Koti
Sent: Sat 2006-05-27 01:58
To: bldg-sim at gard.com
Subject: [bldg-sim] modifying TMY2 weather file in BIN format
Hello all,
I need to modify the direct normal and total horizontal solar values in the
BIN format TMY2 weather file used by DOE-2/eQUEST to ensure both DAYSIM and
DOE-2 provide the same exterior horizontal illuminance. Any pointers on how
this can be done or an alternative approach will be appreciated.
Regards,
Ramana.
--
Venkata Ramana Koti
MS in Building Design (Energy/Climate)
School of Architecture and Landscape Architecture
College of Design
Arizona State University, Tempe AZ 85287
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060527/3fd07500/attachment-0002.htm>
More information about the Bldg-sim
mailing list