[bldg-sim] EQUEST 100% Outdoor Air Ventilation System

[Mike Tillou]

Seth,
 
I suggest you search the Bldg-Sim archives, I know this question has
been discussed many times in the past.  You can find the archives link
at http://www.gard.com/ml/bldg-sim.htm <http://www.gard.com> 
 
Mike
 
 

Michael Tillou, PE 
ETC Group, Inc - Energy Engineering for a Sustainable Future 
Ph:413-458-9870 

	-----Original Message-----
	From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of
Seth P. Spangler
	Sent: Friday, November 17, 2006 1:19 PM
	To: bldg-sim at gard.com
	Subject: [bldg-sim] EQUEST 100% Outdoor Air Ventilation System
	
	

	Hello All,

	 

	I am using EQUEST to model an office building. I have a 100%
outdoor air ventilation unit which supplies make-up air to the return
side of my FCU's at approx 55 deg. One unit uses energy recovery while
the other does not. Any suggestions on how to simulate this in my EM
would be greatly appreciated.

	 

	Seth Spangler 
	Design Engineer

	RMF Engineering, Inc 
	Ph: (843) 971-9639 ext:120
	Fax: (843) 971-9641 
	sspangle at rmf.com 

	 

	
	==================
	You received this e-mail because you are subscribed 
	to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
	from this mailing list send a blank message to 
	BLDG-SIM-UNSUBSCRIBE at GARD.COM



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20061120/4c712bd0/attachment-0005.htm>