[BLDG-SIM] Modeling Centralized GSHP in Equest

nicole chen cloris.chen at gmail.com
Thu Apr 19 01:50:47 PDT 2007


Hi Folks,


I am attempting to simulate a centralized GSHP using Equest. The plant side
is supposed to be coupled with vertical wells using ground loop HX. The
cooling plant equipment is supposed to be large heat pumps or centrifugal
chillers that reverse operation of evaporator and condenser when switching
from cooling to heating.The airside is fan coil rather than room-level
distributed heat pumps.



#1: According to doe-2.2 dictionary only lake/well loop is allowed to be
attached to large water –cooled HPs and chiller condensers. And WLHP is not
allowed so. Is there any method to model such a GSHP system in Equest?



#2: or can lake/well be used to mimic ground source loops? Any experience or
advice of using this alternative is highly appreciated.



Tons of thanks



-- 
Yours
Nicole Chen


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070419/58284db8/attachment.htm>


More information about the Bldg-sim mailing list