[bldg-sim] eQUEST HVAC sizing runs
Andy McNamara
andyjmc at gmail.com
Thu Feb 15 12:48:11 PST 2007
Hello,
As I mentioned previously, I am creating an energy model for a LEED
project. In "baselining" the building, one of the stipulations of ASHRAE
90.1 2004 is:
"G3.1.2.2 Equipment Capacities. The equipment capacities for the baseline
building design shall be based on sizing runs for each orientation and shall
be oversized by 15% for cooling and 25% for heating"
I think that means I use "auto-size", but then how do I capture what that
size is and oversize it accordingly? I am guessing that the results may be
in the SIM file. Can anyone provide tips for executing this? Is there a
better way to do that auto-sizing for each orientation?
Thanks,
Andrew McNamara
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070215/991bf7f0/attachment.htm>
More information about the Bldg-sim
mailing list