[BLDG-SIM] converting Visual DOE to eQuest

[Alec Stevens]

Hi,

Sorry if this question may have already been covered in the past, but I was
wondering if there is a straightforward way to convert Visual DOE files to
run in eQuest, or at the least to grab the building geometry out of the
Visual DOE input file and have it translate into eQuest.  A brief look at
the Visual DOE input file indicated that it was based on DOE 2.1E and not
2.2.  

 

Any suggestions are appreciated.  

 

Sincerely,

Alec Stevens, PE, LEED AP

DMI

450 Lexington St., Newton, MA 02466

p: 617-527-1525 x105 f: 617-527-6606

e: astevens at dmiinc.com

 



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070301/48051b25/attachment.htm>