[BLDG-SIM] eQuest/baseline basics/ZONING, etc.

[Caleb Rockenbaugh]

Thanks for the previous feedback…
 
A general question on the (eQuest) Baseline and Proposed that I wasn’t
able to clarifiy in Appendix G:
 
When you have a complete system for the propsed building—multiple zones,
same level, each serve by GSHP—is the baseline to model the same zones
with the baseline mechanical system in each, say PSZ-AC?  Or is it
appropriate to model with a single system serving all the zones in each
case model?
 
In this regard, has anyone found in their pursuits of energy modeling a
resource to cover such general questions as this?
 
Thanks Again,
caleb
 
CALEB ROCKENBAUGH PE, LEED AP
P C D - E N G I N E E R I N G S E R V I C E S
184 WETTERHORN WAY LONGMONT, CO  80501
303.678.1108 T
303.678.1142 F
HYPERLINK "http://www.pcdengineering.com/"WWW.PCDENGINEERING.COM
 
 
 

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.4/702 - Release Date:
2/25/2007 3:16 PM


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.4/702 - Release Date:
2/25/2007 3:16 PM
 


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070301/c8c9ecc2/attachment.htm>