[BLDG-SIM] Error Message when Performing a Simulation
Brahme, Rohini UTRC
BrahmeR at utrc.utc.com
Thu Sep 6 09:33:41 PDT 2007
It is much easier to go to the BDL file and see what the error is - and
maybe fix it in the .inp file directly.
________________________________
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Jeremy
Plitt
Sent: Thursday, September 06, 2007 11:59 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Error Message when Performing a Simulation
Everyone,
I'm pressing the perform simulation button and am getting an error
message that reads the following:
1 Bad Building Component exists.
When I click on the Building Description button to find out what the
error is, it reads:
SYSTEM EL1 Sys1 (PVAVS) (G.WNW1) has no CONDITIONED ZONE - one is
required.
I triple checked the conditioned/unconditioned zone assignments and they
are all correct.
Does anyone know what might else be causing the error??
Thanks,
Jeremy Plitt
Mechanical Engineer
Setty & Associates, Ltd.
3040 Williams Drive Suite 600
Fairfax, VA 22031-4618
PH: 703-691-2115 Ext. 123
FX: 703-691-8084
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070906/cfa9bde7/attachment-0002.htm>
More information about the Bldg-sim
mailing list