[BLDG-SIM] eQUEST 3D Geometry

[Brandon Nichols]

Dan,
 
Agree with Jonathan, there's a workaround to editing the PD2 file.  But
ours is a bit simpler, see last paragraph of this post...
 
http://elcca-exchange.blogspot.com/2006/12/equest-graphical-editor.html
 
 
Brandon Nichols, PE, LEED(r) AP
Mechanical
HARGIS ENGINEERS

600 Stewart Street

Suite 1000

Seattle, WA 98101

www.hargis.biz

 

d | 206.436.0400  c | 206.228.8707

o | 206.448.3376  f  | 206.448.4450

 
 

  _____  

From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Dan
Ocarroll
Sent: Wednesday, September 05, 2007 11:54 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] eQUEST 3D Geometry



Hello,

 

I'm using eQUEST v3.6.  Sometimes when viewing the 3D geometry and when
zooming in or out the whole model disappears.  The 2D geometry is still
there.  I do not know how to get it to reappear short of reopening the
project.  It happens quite often. Your assistance would be appreciated. 

 

Dan O'Carroll

docarroll at rhfae.com

 

Robert H. Fuller & Assoc, Inc.

5151 Reed Road, Suite 225C

Columbus, OH 43220

 

 


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070905/64ced34c/attachment-0002.htm>