[BLDG-SIM] eQUEST 3D Geometry

[Jonathan Curtin]

Dan,
I usually start off with right clicking in the viewport and resetting
the view (this doesn't fix it though). Next I cycling through selecting
the Utility and Economics, Airside, and Water-side edit tabs until I
return to the Building Shell tab. That usually does the trick for me.
 
Jonathan Curtin
Mechanical Engineer



W  Y  L  I  E 
C O N S U L T I  N G
E  N G  I  N  E  E R S

6161 Savoy, Suite 700   Houston, Texas 77036
713.781.2526     713.781.2536 fax

www.wylieassociates.com <http://www.wylieassociates.com/> 

________________________________

From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Dan
Ocarroll
Sent: Wednesday, September 05, 2007 01:54 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] eQUEST 3D Geometry



Hello,

 

I'm using eQUEST v3.6.  Sometimes when viewing the 3D geometry and when
zooming in or out the whole model disappears.  The 2D geometry is still
there.  I do not know how to get it to reappear short of reopening the
project.  It happens quite often. Your assistance would be appreciated. 

 

Dan O'Carroll

docarroll at rhfae.com

 

Robert H. Fuller & Assoc, Inc.

5151 Reed Road, Suite 225C

Columbus, OH 43220

 

 


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070905/b1117491/attachment-0002.htm>