[Bldg-sim] Campus Chillers

[James V. Dirkes II P.E.]

Dear Gregg,
 
With some luck, the campus will know how they've derived the ton-hr billing
rate and you could apply those unit rates and overhead factors to your
single building.  Much of the time,  though, the billing rates are "seat of
the pants"-based or were developed long ago by people who no longer work
there.....  Good luck!
 

The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653

 

 

  _____  

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Gregg Liddick
Sent: Monday, December 29, 2008 10:54 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Campus Chillers


I'm trying to figure out a way to model utility rates using a campus
chiller.  The building is billed by the ton of chilled water used.  If
anyone can help me find a way to do this it would be greatly appreciated.
 
Best Regards,

 

Gregg Liddick, LEEDR AP

 

The Epsten Group, Inc.

429 Edgewood Avenue

Atlanta GA 30312

Phone: 404-577-0370  ext. 102

Fax: 404-577-1739
gliddick at theepstengroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20081229/3ed03e13/attachment-0001.htm>