[Bldg-sim] Importing WINDOW 5 file into eQUEST

Robin Mitchell rdmitchell at lbl.gov
Fri Feb 1 13:17:29 PST 2008


I have added information to the WINDOW 5.2 Knowledge Base explaining how to
generate the DOE-2 input file from WINDOW. Here is the Knowledge Base URL:

http://windows.lbl.gov/software/window/52/W52_faq.html

There is a DOE-2 section at the top, and the first link in that section is
to the page explaining how to make the input file from WINDOW.

http://windows.lbl.gov/software/window/52/W5-DOE2InputFile.html

Robin
**********
Robin Mitchell
Windows & Daylighting Group
Lawrence Berkeley National Laboratory

-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Paul Gustafson
Sent: Thursday, January 31, 2008 6:26 AM
To: Kevin Burke; Irene Pau; bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Importing WINDOW 5 file into eQUEST

Kevin:

Sorry for the confusion.

1. )  In WINDOW, click on 'Libraries' at the top and then click on
(check mark) 'Window F2'

2.)  Once the window system has been developed, click on the 'REPORT'
icon on the left side and then make sure that the Report Type is 'DOE-2'

3.)  Give this file a unique name and it will be ready for import into
eQuest.

Again, sorry for the confusion on the previous e-message. 


Paul Gustafson, PE, LEED AP
Energy Engineer - Mid-West Region
2310 Crossroads Drive Suite 5200
Madison, WI  53718
McKinstry Co.
Phone: 608-345-3874
www.mckinstry.com
 "For The Life Of Your Building"

-----Original Message-----
From: Kevin Burke [mailto:kevin.burke at arup.com] 
Sent: Thursday, January 31, 2008 8:01 AM
To: Paul Gustafson; Irene Pau; bldg-sim at lists.onebuilding.org
Subject: RE: [Bldg-sim] Importing WINDOW 5 file into eQUEST

Hi Paul,

I don't understand what you mean by:

 "import a file from Window into EQuest using a "Glazing System" file
from WINDOW rather than the "Window" (whole product) file from WINDOW

When you then go on to say: " click the
Report button and specify Report Type = DOE"

If you try to report a glazing system it will only allow you to do this
as a "detailed" report. Whereas the "Window" (whole product) allows you
to do the DOE report!

I'm trying to do this too and it doesn't seem to work. I have done it
before but I don't seem to be able to do it again!

Kind Regards,
Kevin





-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Paul
Gustafson
Sent: 31 January 2008 13:09
To: Irene Pau; bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Importing WINDOW 5 file into eQUEST

Irene:

Robin Mitchell from Lawrence Berkeley National Laboratory was gracious
enough to previously help me with somewhat of the same question.

Import a file from WINDOW into Bequest using a "Glazing System" file
from WINDOW rather than the "Window" (whole product) file from WINDOW.

You need to generate this file from the Window Library -- click the
Report button and specify Report Type = DOE, save that file under
whatever name you wish, and then it is ready for import it into Bequest.

In the detailed mode of bequest, go to the BUILDING SHELL icon, scroll
down to 'Glass Types' on the left side and right click on the 'Import a
Window 4/5 Report file...'

Hopefully this helps.  


Paul Gustafson, PE, LED AP
Energy Engineer - Mid-West Region
2310 Crossroads Drive Suite 5200
Madison, WI  53718
McKinstry Co.
Phone: 608-345-3874
www.mckinstry.com
 "For The Life Of Your Building"

-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Irene Pau
Sent: Thursday, January 31, 2008 3:37 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Importing WINDOW 5 file into eQUEST

Hello,

I would like to import a WINDOW 5 file into eQUEST, but I'm not sure how
to do it and what format it needs to be exported as.  Any pointers would
be greatly appreciated.

Regards,
Irene

____________________________________
Irene C Pau, LEED AP
Engineer
Environmental Physics - Buildings London
 
Arup
13 Fitzroy Street
London W1T 4BQ
Internal freecall: 54107
d: +44 (0) 20 7755 4107
f: +44 (0) 20 7755 3894
e-mail: irene.pau at arup.com
http://www.arup.com

____________________________________________________________
Electronic mail messages entering and leaving Arup  business systems are
scanned for acceptability of content and viruses

_______________________________________________
Bldg-sim mailing list
Bldg-sim at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org

This email is the property of McKinstry or one of its affiliates and may
contain confidential and/or privileged information. If you are not the
intended recipient or have received this e-mail in error please notify
the sender immediately and delete this e-mail. 
Any unauthorized copying, disclosure or distribution of the material in
this e-mail is strictly forbidden.
_______________________________________________
Bldg-sim mailing list
Bldg-sim at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org

This email is the property of McKinstry or one of its affiliates and may
contain confidential and/or privileged information. If you are not the
intended recipient or have received this e-mail in error please notify the
sender immediately and delete this e-mail. 
Any unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.
_______________________________________________
Bldg-sim mailing list
Bldg-sim at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org





More information about the Bldg-sim mailing list