[Bldg-sim] Conditioned zones

[Eric Youngson]

Sim list,

                I noticed that there are two different locations in
eQUEST where one can specify zone-types (Conditioned, Unconditioned &
Plenum). Under the Internal Loads tab it can be specified as well as
under the Air-Side HVAC tab. I understand that the Internal Loads tab is
for spaces  while the Air-Side HVAC tab is for zones but I don't
understand what the difference would be in specifying different
zone-types in either tab. Does anyone know what effect this could have
if they were different

 

Thanks 

 

 

  <http://www.pae-engineers.com/> 

Eric Youngson 

 

PAE Consulting Engineers, Inc. 



503.226.2921 Main
503.542.0567 Direct
503.226.2930 Fax
ericy at pae-engineers.com 

Mechanical 

808 SW Third Avenue - Suite 300
Portland, OR 97204-2426
www.pae-engineers.com 

inspire  interpret  integrate 








-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080717/a013f357/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2029 bytes
Desc: image005.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080717/a013f357/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 143 bytes
Desc: image006.png
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080717/a013f357/attachment.png>