[Bldg-sim] e-quest-simulation error

[Christopher Sturdivant]

Greetings,

I am attempting to run a simulation based on the building's performance
but every time that the simulation runs an error message pops up and
cancels the simulation.  The error message is "cooling coil leaving
temperature must be at least 6F higher than entering water temperature."
I am not sure where in the program, equest, where you can manually enter
the value for entering and leaving water temperature across a cooling
coil.

Thanks!

 

Christopher Sturdivant

Design Engineer-Mechanical

 

RMF Engineering, Inc.

Ph: 843-971-9639 ext. 110

Fax: 843-971-9641

csturdiv at rmf.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080324/8b5a9257/attachment.htm>