[Bldg-sim] Hourly space temperature in eQuest

[Andrew Craig]

Bryan---

In the "Project and Site" tab, there is a section for Hourly Reports in the window pane.  Right click on the "Hourly Report Block" folder and choose to create an hourly report block.  Name it "Zone temperature data" or something like that.  In the scroll down menu for "variable type", select the thermal zone you are interested in.  They should be towards the bottom of the list.  Then in the "variable list", check the box that says "Current hour zone temp (deg F)"  To finish, you need to open the hourly report navigation window and make sure that the block you just created is attached to the default hourly report that is created with every project.  

Now simulate the building.  Depending on what version of eQUEST you have, you can either export the hourly results from the .sim file, or export them by selecting "Export hourly results..." from the File drop down menu.

Good luck.

Andrew

-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org on behalf of JH Choi
Sent: Tue 3/4/2008 7:19 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Hourly space temperature in eQuest
 
Hello.
I am trying to calculate hourly space temperature of each zone in eQuest.
To see the indoor space temperature change pattern, I need the data
generated in hourly data format.
Please help me to figure out how to get the data.

I much appreciate your help in advance.
Thank you.

Bryan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080304/c5c39baa/attachment-0002.htm>