[Bldg-sim] Issues with IES and Revit

[James.Dudt at burthill.com]

Ronan,

Shading devices do not work in the Revit to IES link.  It's something that 
I have been beating my head against the wall about for a couple months 
now.  There's really no way to easily and quickly bring in external 
shading devices into IES from Revit at this point in time, whether those 
are deep mullions or if they are actual louvers/fins.  Sorry for the bad 
news, but hopefully Autodesk or IES will listen to those of us who need 
this feature and will incorporate it soon.

James Dudt, EIT, LEED AP
Mechanical Engineer
Burt Hill
Dubai, United Arab Emirates
Tel: +971 4 810 5700
Fax:  +971 4 810 5800
Mob:  +971 50 154 4795
http://www.burthill.com



"CARNEY Ronan" <Ronan.CARNEY at projectservices.qld.gov.au> 
Sent by: bldg-sim-bounces at lists.onebuilding.org
05/06/2008 04:22 AM

To
<bldg-sim at lists.onebuilding.org>
cc

Subject
[Bldg-sim] Issues with IES and Revit







Dear all, 
I am currently working on a project where I've to model energy, thermal 
and daylight analysis on a very large building. I'm using the link between 
Revit MEP2008 and IES. I've also got the full licence for IES's 
applications. 
However, when I import the model into IES several issues and problems 
occur that I require help with, they are as follows;
1) Some windows disappear. These windows are made up as curtain walls. Now 
most of the windows in the model are done the same way but a particular 
few disappear, troublesome.
2) External shading devices disappear. These are modelled as a speciality 
family. I've tried them previously as windows and they don?t work. I would 
like to use them as a wall family but due to the architects 3D modelling 
procedures and the complexity of the model, we can't. 
3) One of my rooms is disappearing. Claims it has no bounding elements. 
But it has 6 bounding elements (walls, ceiling & floor). 
4) Internal light shelf becomes a "floor" leaving the space reshaped and 
obscure. 

I'd appreciate any help on the matters and am willing to share my 
knowledge to help others. I'm very versed with these issues so please, 
don?t be cheeky and recommend Autodesk's White Papers on BIM or energy 
modelling as I've read them. There is also a detailed discussion about 
this on Autodesk's forum 
http://discussion.autodesk.com/thread.jspa?forumID=188&threadID=626566
Regards,
Ronan Carney
Electrical Engineer
Project Services
* Level 5B 80 George St Brisbane
( Ph: (07) 3224 5983
2 Fax: (07) 3224 6151
,Email: Ronan.Carney at projectservices.qld.gov.au 
***************************** Disclaimer ***************************** 
The contents of this electronic message and any attachments are intended 
only for the addressee and may contain privileged or confidential 
information. They may only be used for the purposes for which they were 
supplied. If you are not the addressee, you are notified that any 
transmission, distribution, downloading, printing or photocopying of the 
contents of this message or attachments is strictly prohibited. The 
privilege of confidentiality attached to this message and attachments is 
not waived, lost or destroyed by reason of mistaken delivery to you. If 
you receive this message in error please notify the sender by return 
e-mail or telephone. 
Please note: the Department of Public Works carries out automatic software 
scanning, filtering and blocking of E-mails and attachments (including 
emails of a personal nature) for detection of viruses, malicious code, 
SPAM, executable programs or content it deems unacceptable. All reasonable 
precautions will be taken to respect the privacy of individuals as 
outlined in the DPW Privacy Plan. Personal information will only be used 
for official purposes, e.g. monitoring Departmental Personnel's compliance 
with Departmental Policies. Personal information will not be divulged or 
disclosed to others, unless as required by Departmental Policy and/or 
State or Commonwealth Law.
Thank you. _______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG



This email is intended for named recipients only.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080506/1e9c7c6e/attachment-0001.htm>